2600AS-901-01 Rev. B / September 2008 Return to Section Topics 17-9
Series 2600A System SourceMeter® Instruments Reference Manual Section 17: Web Interface and TSB Embedded
To turn off the ID indicator, Click ID.
The message LAN STATUS INDICATOR does not display on the front panel of the instrument.
Working with TSB Embedded
TSB Embedded is an option to a full version of Test Script Builder (TSB) Suite. The capabilities of
TSB Embedded are very similar to TSB. TSB Embedded includes a command line interface that
you can use to issue ICL commands, create, modify, and save test scripts to the instrument.
Using the Instrument Control Library (ICL)
The response from the instrument appears in the instrument output window.
Complete the following steps to issues commands from the command line.
1. To issue a ICL Command, type the command in the console and then click Enter.
2. (Optional) Click Clear to clear the Instrument output window.
Creating scripts
Complete the following steps to create a new script:
1. Click in the script editor window and then type the first line of your script and then use the
Enter key advance to line 2.
2. In the TSP Script line, type the name of the script and then click Save script.
The instrument validates the syntax and then saves the script to the nonvolatile memory.
Clearing the script editor window
• To remove the code from the script editor, click Clear.
Running scripts
• To run a script, select the desired script from the User script window and then click Run.
Stopping scripts
To stop a running script, click Abort script.
Deleting scripts
To delete a script from TSB embedded, complete the following steps:
NOTE You cannot retrieve a deleted scripts
• Select the desired script from the user script window and then click Delete.
Modifying scripts
Complete the following steps to modify a script:
1. Select the desired script from the User script window and then modify the desired code in
the script editor.
2. Click Save script to validate the syntax and save the script.
3. The message, Script clearing will be overwritten displays, do one of the following:
To Next Page
Loading...
Need help?
General
