Keithley 2600a series User Manual

16-12 Return to Section Topics 2600AS-901-01 Rev. B / September 2008
Section 16: LAN Concepts and Settings Series 2600A System SourceMeter® Instruments Reference Manual
Figure 16-4
LAN CONFIG/FAULT
Viewing the network settings
You can use the Status menu to view the active network settings.
Complete the following steps to view the active network settings.
1. From the front panel press, MENU > LAN > STATUS.
2. Turn the navigation wheel to the right or to the left to view one of the following network
settings:
• IP address
• Gateway
• Subnet-mask
• Method
• DNS
• MAC address
3. Push the navigation wheel to view the status.
4. Press ENTER to return to the STATUS menu.
Confirming the active speed and duplex negotiation
The Series 2600A automatically detects the speed and duplex negotiation active on the LAN.
Once the speed and duplex negotiation is detected, the instrument automatically adjusts to match
the LAN settings.
Confirming port numbers
Use the port menu to view the ports numbers assigned to each protocol. Table 16-2 displays the
command interface and the required port number.
Table 16-2
Port number
Command Interface Port number
Raw socket 5025
Telnet 23
VXI-11 1024
DST 1030

Keithley 2600a series Specifications

General

Brand	Keithley
Model	2600a series
Category	Measuring Instruments
Language	English