Keithley SourceMeter 2400 User Manual

2400 Series SourceMeter
®
User’s Manual IEEE-488 and SCPI Conformance Information E-3
Table E-1
IEEE-488 documentation requirements
Requirements Description or reference
(1)
(2)
(3)
(4)
(5)
(a)
(b)
(c)
(d)
(e)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(20)
(21)
(22)
(23)
IEEE-488 Interface Function Codes.
Behavior of SourceMeter when the address is set outside
the range 0-30.
Behavior of SourceMeter when valid address is entered.
Power-On Setup Conditions.
Message Exchange Options:
Input buffer size.
Queries that return more than one response message
unit.
Queries that generate a response when parsed.
Queries that generate a response when read.
Coupled commands.
Functional elements required for SCPI commands.
Buffer size limitations for block data.
Syntax restrictions.
Response syntax for every query command.
Device-to-device message transfer that does not follow
rules of the standard.
Block data response size.
Common Commands implemented by SourceMeter.
Calibration query information.
Trigger macro for *DDT.
Macro information.
Response to *IDN (identification).
Storage area for *PUD and *PUD?.
Resource description for *RDT and *RDT?.
Effects of *RST, *RCL and *SAV.
*TST information.
Status register structure.
Sequential or overlapped commands.
Operation complete messages.
See Appendix D.
Cannot enter an invalid address.
Address changes and bus resets.
Determine by :SYSTem:POSetup
(Section 18).
2048 bytes.
None.
All queries (Common Commands and
SCPI).
None.
See Table E-2.
Contained in SCPI command sub-
systems tables (see Table 18-1 through
Table 18-11).
Block display messages: 32 characters
max.
See Section 14, “Programming syntax.”
See Section 14, “Programming syntax.”
None.
See Section 18, “FORMat subsystem.”
See Section 16, “Common Commands.”
See Service Manual.
Not applicable.
Not applicable.
See Section 16, “Common Commands.”
Not applicable.
Not applicable.
See Section 16, “Common Commands.”
See Section 16, “Common Commands.”
See Section 15, “Status Structure.”
All are sequential except :INIT.
*OPC, *OPC? and *WAI; see
Section 16, “Common Commands.”
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Keithley SourceMeter 2400 Specifications

General

Brand	Keithley
Model	SourceMeter 2400
Category	Measuring Instruments
Language	English