To Next Page

To Previous Page

1-26 Getting Started 2400 Series SourceMeter

User’s Manual

Front panel control

Front panel display circuitry is controlled from the DISABLE DISPLAY conﬁguration

menu, which is accessed by pressing CONFIG and then EDIT (or TOGGLE). To select an

option (NOW, NEVER, SWEEP, or STORE), use the EDIT cursor keys to place the cursor

on the desired option, then press ENTER.

The options for DISABLE DISPLAY are explained as follows:

NOW — Select this option to disable the display now.

NEVER — Select this option if you do not want the display to disable.

SWEEP — Select this option if you want the display to disable while performing a sweep.

The display will disable as soon as sweep is started. The display will automatically re-

enable after the sweep is completed.

STORE — Select this option if you want the display to disable when storing source-

measure readings in the buffer. The display will disable as soon as the buffer is enabled.

The display will automatically re-enable after the storage process is completed. Note that

with this option, the display will disable while performing a sweep. Sweep readings are

automatically stored in the buffer.

Remote command programming

Use the following SCPI commands to enable or disable the front panel display circuitry:

:DISPlay:ENABle OFF Disable the display

:DISPlay:ENABle ON Enable the display

Conﬁguration menus

There are a number of conﬁguration menus that can be accessed by pressing the CONFIG

key followed by the appropriate function or mode key. For example, you can conﬁgure the

voltage source by pressing CONFIG then SOURCE V. Conﬁguration menus, which are

summarized in Table 1-6 through Table 1-10, are available for the following operating

modes:

• Measure functions (V, Ω, FCTN): Table 1-6.

• SOURCE V, SOURCE I, and RANGE: Table 1-7.

• REL, FILTER, and LIMIT: Table 1-8.

• TRIG: Table 1-9.

• SWEEP, DIGITS, SPEED, and STORE: Table 1-10.

• ON/OFF OUTPUT and Display (EDIT or TOGGLE): Table 1-11.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Keithley SourceMeter 2400 User Manual

Other manuals for Keithley SourceMeter 2400