EasyManuals Logo

KTM 250 XC-W TPI User Manual

KTM 250 XC-W TPI
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #144 background imageLoading...
Page #144 background image
18 SERVICE WORK ON THE ENGINE
142
18.2 Checking 2-stroke oil level
Warning
Engine failureThe engine will not be lubricated unless there is 2-stroke oil in the oil tank.
If the oil level warning light lights up, the 2-stroke oil is sufficient for the remaining tank of fuel.
As soon as the oil level warning light lights up, ride for no longer than until the remaining fuel in the
tank is depleted.
At the next opportunity add 2-stroke oil before you refuel.
Time the oil pump if the 2-stroke oil hose has been removed or the 2-stroke oil tank has been fully
depleted in error.
Preparatory work
Stand the motorcycle upright on a horizontal surface.
S03500-10
Main work
Check the 2-stroke oil level in the oil tank.
Info
For a full tank of fuel, the 2-stroke oil tank must be
filled up to at least the upper abutting edge
A
.
The 2-stroke oil tank must be completely filled if possible.
» If the 2-stroke oil level is too low:
Add 2-stroke oil. ( p. 49)
18.3 Priming oil pump
Warning
Engine failureThe engine will not be lubricated unless there is 2-stroke oil in the oil tank.
If the oil level warning light lights up, the 2-stroke oil is sufficient for the remaining tank of fuel.
As soon as the oil level warning light lights up, ride for no longer than until the remaining fuel in the
tank is depleted.
At the next opportunity add 2-stroke oil before you refuel.
Time the oil pump if the 2-stroke oil hose has been removed or the 2-stroke oil tank has been fully
depleted in error.
Condition
The engine is off.
Preparatory work
Remove the seat. ( p. 79)
Stand the motorcycle upright on a horizontal surface.
Check 2-stroke oil level. ( p. 142)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KTM 250 XC-W TPI and is the answer not in the manual?

KTM 250 XC-W TPI Specifications

General IconGeneral
Displacement249 cc
CoolingLiquid cooled
Transmission6-speed
StarterElectric starter
Front BrakeDisc brake
Rear BrakeDisc brake
Bore x Stroke66.4 mm x 72 mm
Seat Height960 mm
Ground Clearance370 mm
Engine Type1-cylinder, 2-stroke
Fuel SystemTPI
Front SuspensionWP XPLOR-USD, Ø 48 mm
Rear SuspensionWP Xplor shock absorber
Fuel Capacity9 liters
FrameChromium-Molybdenum steel central tube frame
Weight (without fuel)103 kg

Related product manuals