KTM 250 XC-W TPI User Manual

STORAGE 20
153
Info
Do not use non-porous materials since they prevent
humidity from escaping, thus causing corrosion.
Avoid running the engine for a short time only. Because
the engine will not warm up sufficiently, the water
vapor produced during combustion will condense, caus-
ing engine parts and the exhaust system to rust.
20.2 Preparing for use after storage
401059-01
– Remove the motorcycle from the lift stand. ( p. 65)
– Install the 12-V battery. ( p. 119)
– Perform checks and maintenance measures when preparing for
use. ( p. 44)
– Make a test ride.

KTM 250 XC-W TPI Specifications

General

Displacement	249 cc
Cooling	Liquid cooled
Transmission	6-speed
Starter	Electric starter
Front Brake	Disc brake
Rear Brake	Disc brake
Bore x Stroke	66.4 mm x 72 mm
Seat Height	960 mm
Ground Clearance	370 mm
Engine Type	1-cylinder, 2-stroke
Fuel System	TPI
Front Suspension	WP XPLOR-USD, Ø 48 mm
Rear Suspension	WP Xplor shock absorber
Fuel Capacity	9 liters
Frame	Chromium-Molybdenum steel central tube frame
Weight (without fuel)	103 kg