KTM 250 XC-W TPI User Manual

7 COMBINATION INSTRUMENT
26
– Wait 3 - 5 seconds.
The settings are stored.
Info
If no button is pressed for 10–12 seconds, or if an
impulse comes from the wheel speed sensor, the
settings are automatically saved and the setup menu is
closed.
7.4 Adjusting combination instrument function
Info
When the vehicle is delivered, only the SPEED/H and SPEED/ODO display modes are activated.
Condition
The motorcycle is stationary.
400318-01
– Repeatedly press the button briefly until H appears at the
bottom right of the display.
– Press the button for 2–3 seconds.
The Setup menu is displayed and the active functions are
shown.
Info
If no button is pressed for 10–12 seconds, the settings
are automatically saved.
If no button is pressed for 20 seconds, or if an impulse
comes from the wheel speed sensor, the settings are
automatically saved and the setup menu is closed.
– Repeatedly press the button briefly until the desired func-
tion flashes.
The selected function flashes.
Activating the function
– Press the button .
The symbol continues to appear in the display and the
next function appears.
Deactivating a function
– Press the button .
The symbol disappears in the display and the next
function appears.

KTM 250 XC-W TPI Specifications

General

Displacement	249 cc
Cooling	Liquid cooled
Transmission	6-speed
Starter	Electric starter
Front Brake	Disc brake
Rear Brake	Disc brake
Bore x Stroke	66.4 mm x 72 mm
Seat Height	960 mm
Ground Clearance	370 mm
Engine Type	1-cylinder, 2-stroke
Fuel System	TPI
Front Suspension	WP XPLOR-USD, Ø 48 mm
Rear Suspension	WP Xplor shock absorber
Fuel Capacity	9 liters
Frame	Chromium-Molybdenum steel central tube frame
Weight (without fuel)	103 kg