KTM 250 XC-W TPI User Manual

RIDING INSTRUCTIONS 9
49
400382-10
–
Fill the fuel tank with fuel up to level
A
.
Guideline
Level
A
35 mm (1.38 in)
Total fuel tank
capacity, approx.
9 l
(2.4 US gal)
Super unleaded
(ROZ 95/RON
95/PON 91)
( p. 167)
Info
Do not refuel using pre-mixed fuel.
– Close the fuel tank filler cap. ( p. 20)
9.9 Adding 2-stroke oil
Warning
Engine failure The engine will not be lubricated unless there is 2-stroke oil in the oil tank.
If the oil level warning light lights up, the 2-stroke oil is sufficient for the remaining tank of fuel.
– As soon as the oil level warning light lights up, ride for no longer than until the remaining fuel in the
tank is depleted.
– At the next opportunity add 2-stroke oil before you refuel.
– Time the oil pump if the 2-stroke oil hose has been removed or the 2-stroke oil tank has been fully
depleted in error.
– Open 2-stroke oil tank cap. ( p. 20)
M01516-10
–
Fill the 2-stroke oil tank up to the lower edge
A
of the filler
neck.
2-stroke oil tank con-
tent approx.
0.6 l (0.6 qt.) Engine oil, 2-stroke
( p. 166)
– Close 2-stroke oil tank cap. ( p. 21)

KTM 250 XC-W TPI Specifications

General

Displacement	249 cc
Cooling	Liquid cooled
Transmission	6-speed
Starter	Electric starter
Front Brake	Disc brake
Rear Brake	Disc brake
Bore x Stroke	66.4 mm x 72 mm
Seat Height	960 mm
Ground Clearance	370 mm
Engine Type	1-cylinder, 2-stroke
Fuel System	TPI
Front Suspension	WP XPLOR-USD, Ø 48 mm
Rear Suspension	WP Xplor shock absorber
Fuel Capacity	9 liters
Frame	Chromium-Molybdenum steel central tube frame
Weight (without fuel)	103 kg