KTM 250 XC-W TPI User Manual

7 COMBINATION INSTRUMENT
36
Display Press the but-
ton for 2–3
seconds.
Briefly press
the button .
Press the but-
ton for 2–3
seconds.
Briefly press
the button .
Wait 3 - 5
seconds.
Wait 10 - 12
seconds.
Display mode
SPEED/TR2 (trip
master 2)
Clears the
values TR2
and A2.
Next display
mode
Reduces
value of TR2.
Reduces
value of TR2.
Setting TR2
(trip master 2)
Increases
value of TR2.
Increases
value of TR2.
Reduces
value of TR2.
Reduces
value of TR2.
Stores and
closes the
Setup menu.
Display mode
SPEED/A1 (aver-
age speed 1)
Displays of
TR1, A1 and
S1 are reset
to 0.0.
Next display
mode
No function No function
Display mode
SPEED/A2 (aver-
age speed 2)
No function Next display
mode
No function No function
Display mode
SPEED/S1 (stop
watch 1)
Displays of
TR1, A1 and
S1 are reset
to 0.0.
Next display
mode
No function No function
Display mode
SPEED/S2 (stop
watch 2)
The displays
of S2 and
A2 are set to
0,0.
Next display
mode
No function Starts or
stops S2.
7.24 Table of conditions and menu activation
Display The motorcycle is
stationary.
Menu can be acti-
vated
Display mode SPEED/H (operating hours) •
Setup menu •
Adjusting the unit of measurement •
Setting the clock •
Display mode SPEED/LAP (lap time) •
Viewing the lap time •
Display mode SPEED/TR1 (trip master 1) •
Display mode SPEED/TR2 (trip master 2) •
Setting TR2 (trip master 2) •
Display mode SPEED/A1 (average speed 1) •
Display mode SPEED/A2 (average speed 2) •
Display mode SPEED/S1 (stop watch 1) •
Display mode SPEED/S2 (stop watch 2) •

KTM 250 XC-W TPI Specifications

General

Displacement	249 cc
Cooling	Liquid cooled
Transmission	6-speed
Starter	Electric starter
Front Brake	Disc brake
Rear Brake	Disc brake
Bore x Stroke	66.4 mm x 72 mm
Seat Height	960 mm
Ground Clearance	370 mm
Engine Type	1-cylinder, 2-stroke
Fuel System	TPI
Front Suspension	WP XPLOR-USD, Ø 48 mm
Rear Suspension	WP Xplor shock absorber
Fuel Capacity	9 liters
Frame	Chromium-Molybdenum steel central tube frame
Weight (without fuel)	103 kg