8. Reinstall
and
tighten the oil-level-check-plug and
filling plug.
(1) Check plug
(2) Filling plug
(3)
Drain plug
2. Adjusting the engine valve
clearance
• Consult your local KUBOTA Dealer for adjusting the
clearance of the engine valve.
SER
VICE EVERY 1000 HOURS
OR 1 YEAR
Servicing to be sure to perform once every 1000hours
or yearly, whichever comes first.
1. Replacing the air cleaner element
[Single element type]
Be
sure to perform once every 1000 hours or yearly,
whichever comes first.
(See Cleaning
the air cleaner element [Single element
type] on page 104)
1. Remove the air-cleaner-element.
2. Attach new air-cleaner-element.
(1) Elements
(2) Cover
(3)
Evacuator valve
IMPORTANT :
• Be sure
to refit the cover with the arrow
(on the rear) upright. If the cover is
improperly fitted,
dust passed by the baffle
and directly adheres to the element.
2. Checking the exhaust manifold
Be sure to perform once yearly or after every sixth
cleaning, whichever comes first.
• Consult your local KUBOTA Dealer for checking the
exhaust manifold.
SER
VICE EVERY 1500 HOURS
1. Cleaning the fuel injector nozzle
tip
• Consult your local KUBOTA Dealer for cleaning the
fuel-injector-nozzle-tip.
2. Replacing the oil separator
element
WARNING
To avoid personal injury or death:
•
Be sure to stop the engine before replacing the
oil-separator-element.
1. Remove the cover.
2. Remove the
oil-separator-element. Wipe off the oil
and carbon in the case with a clean rag.
3. Fit a new oil-separator-element.
PERIODIC SERVICE SERVICE EVERY 800 HOURS
To Next Page
Loading...
Need help?
General
