15.1 How to use the cruise control lever (if
equipped) [HST type only]
(1) Cruise control lever (A) Increase
(B) Decrease
(C)
Off
To engage the cruise control device
The
proper
forward speed will be maintained if you
apply the cruise-control-lever at any position.
1. To operate faster than the set speed, depress the
speed-control-pedal further down in the proper
forward speed.
The set speed will be resumed if you release the
speed-control-pedal.
NOTE :
• When you stand up from the operator's seat
with the speed-control-pedal stepped on or the
cruise-control-lever engaged on, the engine will
stop regardless of whether the tractor is moving
or not.
The engine stop is because that the tractor is
equipped with the operator-presence-control-
system (OPC).
To disengage the cruise control device
1.
Move the cruise-control-lever all the way back.
2.
Move the cruise-control-lever to the “OFF” position
to release the cruise control.
3. Depress both brake pedals.
NOTE :
• Cruise control will be disengaged automatically
when both brake pedals are depressed.
• Cruise-control-device does not disengage when
the individual right or left brake is applied.
TRACTOR LIGHTS
(1) Head light
(2) T
urn signal / hazard light
(3) Rear turn signal / hazard
light
(4) Tail light
INSTRUMENT PANEL AND CONTROLS
FOOT CONTROLS AND HAND CONTROLS