Kubota L3901 User Manual

AUXILIARY HYDRAULICS
1. How to use the hydraulic block
type outlet when the hydraulically
operated implement is attached
Hydraulic-block-type-outlet is useful when adding
hydraulically operated
implement such as front-end-
loader, front blade, and so on.
1. Remove the block cover.
2. Route the implement inlet, outlet, and return hoses
as shown in the illustration.
(1) Block cover
Block cover (1) removed
(A) From gear pump
(B) T
o implement
(C) From implement (outlet)
(D) From implement (tank port)
To implement (B)
Max flow
25.7 L/min
(6.8 gals./min)
Max pressure
16.2 MPa
(165 kgf/cm
2
)
[2347 psi]
HYDRAULIC UNIT AUXILIARY HYDRAULICS
80
L3301,L3901

Kubota L3901 Specifications

General

Engine Type	Diesel
Engine Horsepower	37.5 HP
3-Point Hitch	Category I
Weight	2, 623 lbs (Gear Drive), 2, 778 lbs (Hydrostatic)
Displacement	111.4 cu in
Cylinders	3
Displacement (cu in)	111.4
Hydraulic System Type	Open center
Width	55.1 inches
Transmission Type	Gear or HST
Fuel Capacity	11.1 gal
Gears	8 forward, 4 reverse (Gear)
Number of Gears	8 forward, 4 reverse
Fuel Tank Capacity	11.1 gal
Lift Capacity at 24"	1433 lbs
Height	91.7 inches
Tire Size (Front)	7-16
Tire Size (Rear)	11.2-24
Engine Model	D1803