Kubota L3901 User Manual

(1) Jack points
You can not adjust width of the front tread.
IMPORT
ANT :
•
Do not turn the front discs to obtain wider tread.
• When re-fitting or adjusting a wheel, tighten the
bolts to the following torques.
(1) Bolt
Bolt (1) Tightening torque
137 N⋅m
(14 kgf⋅m)
[100 ft⋅lbs]
Then recheck after driving the tractor as
follows, and
thereafter according to SERVICE
INTERVALS on page 87.
Driving tractor
200 m (200 yards) and 10 times of shuttle
movement by 5 m (5 yards)
[2WD Front wheel]
Tire Tread
5-15 Farm
(A) 1050 mm
(41.3 in.)
23 x 8.5-12 Turf
(A) 1175 mm
(46.3 in.)
[4WD Front wheel]
(1) Tread
Tire Tread
7.2-16 Farm
1095 mm
(43.1 in.)
25 x 8.5-14 Turf
1105 mm
(43.5 in.)
27 x 8.5-15 IND
1115 mm
(43.9 in.)
IND
For industrial
2. Rear wheels
You can adjust the width of rear tread with the standard
equipped tires.
(See Adjusting the rear wheels
on page
84.)
WHEEL ADJUSTMENT TIRES, WHEELS, AND BALLAST
L3301,L3901
83

Kubota L3901 Specifications

General

Engine Type	Diesel
Engine Horsepower	37.5 HP
3-Point Hitch	Category I
Weight	2, 623 lbs (Gear Drive), 2, 778 lbs (Hydrostatic)
Displacement	111.4 cu in
Cylinders	3
Displacement (cu in)	111.4
Hydraulic System Type	Open center
Width	55.1 inches
Transmission Type	Gear or HST
Fuel Capacity	11.1 gal
Gears	8 forward, 4 reverse (Gear)
Number of Gears	8 forward, 4 reverse
Fuel Tank Capacity	11.1 gal
Lift Capacity at 24"	1433 lbs
Height	91.7 inches
Tire Size (Front)	7-16
Tire Size (Rear)	11.2-24
Engine Model	D1803