KYMCO MXU 300 User Manual

10.FINAL REDUCTION/
TRANSMISSION SYSTEM
10-6
MXU 300/250
Inspect the needle bearing for allow play in
the transmission case cover or the bearing
turns roughly.
If any defects are found, replace the bearing
with a new one.
ASSEMBLY
Install the needle bearing.
Install the oil seal and bearing.
Install the bearing circlip.
Install the drive axle and drive axle cirelip.
TRANSMISSION (MXU 250)
REMOVAL
Remove the transmission cover. (Refer to the
“TRANSMISSION CASE COVER REMOVAL” in
the chapter 10)
Check the transmission operation.
Unsmooth operation → Repair.
N
eedle Bearing
Bearing
N
eedle Bearing

KYMCO MXU 300 Specifications

General

Brand	KYMCO
Model	MXU 300
Category	Offroad Vehicle
Language	English