KYMCO MXU 300 - Transmission (Mxu 300)

10.FINAL REDUCTION/
TRANSMISSION SYSTEM
10-29
MXU 300/250
Install the drive bevel gear cover and tighten
the three bolts.
Fill the engine with oil and install the oil
filler bolt. (Refer to the “TRANSMISSION
OIL REPLACEMENT” section in the chapter
3)
Specified Gear Oil:
KYMCO SIGMA GEAR OIL 90#
Oil Capacity (MXU 300):
At disassembly:
0.6 liter (0.528 lmp qt, 0.636 US qt)
At change:
0.5 liter (0.44 lmp qt, 0.53 US qt)
TRANSMISSION (MXU 300)
REMOVAL
Remove the shift shaft.
Remove the stopper plug and washer, then
remove the spring and shift cam stopper.
Bolts
Marks Ring Gear Cove
r
Shift Shaf
t
Align the mark on the drive bevel gea
r
cover with the index mark on the
transmission case cover.
＊
Plug
/
Washer Spring
Speedometer Gear Shift Cam Stoppe
r