18. STARTING SYSTEM
18-8
MXU 300/250
STARTER CLUTCH
REMOVAL
Remove the right crankcase cover. (Refer to
the “WATER PUMP SHAFT REMOVAL”
section in the chapter 12)
Remove the flywheel. (Refer to the “A.C.
GENERATOR/FLYWHEEL
REMOVAL” section in the chapter 16)
Inspect the starter one-way clutch for wear
or damage.
Remove the starter driven gear.
Inspect the starter driven gear for wear or
damage.
Starter One-way Clutch
Starter Driven Gea