KYMCO MXU 300 User Manual

3. INSPECTION/ADJUSTMENT
3-15
MXU 300/250
DRIVE BELT
Remove the left crankcase cover.
Inspect the drive belt for cracks, scaling,
chipping or excessive wear.
Measure the V-belt width
Service limit: 22 mm (0.88in)
Replace the drive belt if out of specification.
BRAKE PADS INSPECTION
A wear indicator is provided on each brake.
The indicators allows checking of brake
pads wear. Check the position of the
indicator. If the indicator reaches the wear
limit line, to replace the pads.
Drive Bel
t
Front Calipe
r
Rear Calipe
r

KYMCO MXU 300 Specifications

General

Brand	KYMCO
Model	MXU 300
Category	Offroad Vehicle
Language	English