Kyocera ECOSYS FS-1020MFP User Manual

2M4/2M5/2M6/2M7
2-4-15
4. Install the toner container in the
machine.
* : Push in firmly until you hear a “click”
sound.
Figure 2-4-33
(11) Notice after replacing maintenance kit
3 in 1 25/26 ppm model, 4 in 1 20/21,25/26 ppm model
Procedure
1. Insert the power plug and turn the
power switch on.
2. Press the Menu key.
3. In the Menu. menu screen, press cursor
key to select System menu.Press the
OK key.
4. In the System menu screen, press cur-
sor key to select Adjust / maint.Press
the OK key.
5. In the Adjust / maint. menu screen,
press cursor key to select Service Set-
ting.Press the OK key.
6. In the Service Setting menu screen,
press cursor key to select Mainte-
nance.Press the OK key.
* : During the MK replacement, the key is
operative only when Replace MK is dis-
played (MK Counter: 100,000 or more).
* : If the Administrator ID entry display
appears, use the numeric keys to enter
the Administrator ID (4 digits) and press
OK key. The default setting is 2500 for
the 25/26 ppm model, 2000 for the 20/
21 ppm model.
Figure 2-4-34
Toner container
Menu
: System Menu
System Menu
: Adjust /maint.
Adjust /maint.
: Service Setting
Service Setting
: Maintenance

Kyocera ECOSYS FS-1020MFP Specifications

General

Brand	Kyocera
Model	ECOSYS FS-1020MFP
Category	All in One Printer
Language	English