8-4
Fax Settings > Default FAX settings
Device Settings
Configures overall machine operation.
Display Settings
[Home] key > [...] > [System Menu] > [Device Settings] > [Display Settings]
Function Settings Configures settings for copying, sending and Document Box
functions.
8-8
Function Defaults Defaults are the values automatically set after the warm-up is
completed or the [Reset] key is selected.
Set the defaults for available settings such as copying and
sending. Setting the frequently-used values as defaults makes
subsequent jobs easier.
8-8
Fax/iFax Configures settings for fax functions. 8-9
Address Book Configures Address Book settings.
For details on Address Book, refer to the following:
Adding a Destination (Address Book) (page 2-14)
—
One-Touch Key Configures One Touch Key settings.
For details on One Touch Key, refer to the following:
Adding a Destination on One Touch Key (page 2-22)
—
RX/Forward Rules/Fax Box Configures settings for RX/Forward rules and FAX Box.
For details on RX/Forward rules, refer to the following:
Memory Forwarding (page 5-2)
For details on FAX Box, refer to the following:
FAX Box Function (page 5-18)
—
Fax Memory RX Box Set whether to perform Print Immediately for the fax documents
received or to save them in the Fax Memory RX Box.
8-16
Status Configure settings for Status. 8-16
Security Settings Configures security settings. 8-16
Item Description
Show Power Off Message Set the mode whether display a confirmation message in power supply off.
Value: Off, On
Quick Setup Registration
(Fax)
Select the functions to be registered for Quick Setup.
Six keys of the Quick Setup screen are allocated to typical functions but can be
changed as necessary.
Six items in the following options are available.
Value: Original Size, 2-sided/Book Original, Sending Size, Original Orientation,
Density, Original Image, Fax TX Resolution, Zoom, Continuous Scan
Item Description
Reference
Page
To Next Page
Loading...
Need help?
General
