2-12
Before Using the Fax Machine > Quick Setup Wizard
FAX and Power Off setup procedure
1
Display the screen.
[Home] key > [...] > [System Menu] > [Quick Setup Wizard] > [FAX Setup]
2
Configure the function.
Start the wizard. Follow the instructions on the screen to configure settings.
When you have completed the settings, select [Finish].
Redial Retry Times Set the number of redials. 8-11
Show Power Off
Message
Show Power Off
Message
Set the mode whether display a confirmation message
in power supply off.
8-4
*1 Inch version only.
*2 This is displayed when the option of two fax kits has been installed.
*3 DRD reception mode is available for some countries.
*4 This setting does not appear in some regions.
*5 This function may not be displayed, depending on the installed options.
The settings can be changed in the system menu.
Default FAX settings (page 8-2)
If the user authentication screen appears, enter your login user name and login password and select [Login].
The factory default login user name and login password are set as shown below.
Login User Name: 2554ci:2500, 3554ci:3500, 4054ci/4004i:4000, 5054ci/5004i:5000, 6054ci/6004i:6000,
7054ci/7004i:7000
Login Password: 2554ci:2500, 3554ci:3500, 4054ci/4004i:4000, 5054ci/5004i:5000, 6054ci/6004i:6000,
7054ci/7004i:7000
Control Description
End Exits the wizard.
Previous Returns to the previous item.
Skip Advances to the next item without setting the current item.
Next Advances to the next screen.
Back Returns to the previous screen.
Step Setting item Description
Reference
Page
To Next Page
Loading...
Need help?
General
