Kyocera FAX System 12 User Manual

11-2
Troubleshooting > Indicators During Sending/Receiving Operation
Indicators During Sending/Receiving Operation
The [Data] indicators show the fax transmission status.
•The [Data] indicator blinks during fax transmission and reception.
•The [Data] indicator is lit when there is source data stored in the memory for delayed transmission.
Responding to an Attention Indicator Flashes
If the [Attention] indicator flashes, select the [Status/Job Cancel] key to check an error message. If the message is not
indicated on the touch panel when the [Status/Job Cancel] key is pressed or the [Attention] indicator flashes, check
the following.
Symptom Checkpoints Corrective Actions
Reference
Page
Cannot send fax. Is the modular cord
connected correctly?
Connect the modular cord correctly. —
Is Permitted FAX No. or
Permitted ID No. registered
correctly?
Check Permitted FAX No. and
Permitted ID No.
8-17
Has a communication error
occurred?
Check error codes in the TX/RX
Result Report and Activity Report. If
the error code starts with "U" or "E",
perform the corresponding
procedure.
11-6
Is the destination FAX line
busy?
Send again. —
Does the destination FAX
machine respond?
Send again. —
Is there an error other than
above?
Contact your Service
Representative.
—

Kyocera FAX System 12 Specifications

General

Brand	Kyocera
Model	FAX System 12
Category	Fax Machine
Language	English