3-7
Sending Faxes > Methods For Entering the Destination
Methods For Entering the Destination
Entering the destination fax number with the numeric keys
The procedure for entering the destination fax number with the numeric keys is explained below.
1
Select [Fax] on the Home screen.
2
Enter the fax number of the receiving system.
If [New Destination Entry(Fax)] is set to [Prohibit], it is not possible to directly enter a fax number using the numeric
keys.
Select the destination from the Address Book or the One Touch Key.
New Destination Entry (Fax) (page 8-14)
Up to 64 digits can be entered.
Use the numeric keys to enter a number.
Key Description
Pause Selecting this key adds about three seconds of waiting time during
dialing. For example, when dialing the receiving system on an external
line, you can use this method to insert a pause before resuming dialing
after you dial a specific number.
Space It is possible to enter half-width spaces in the entry of the destination
number.
This is useful when checking if the destination number has been entered
correctly.
< > Moves the cursor.
(Backspace) To correct the fax number, select [ ](Backspace) on the touch panel,
and delete the digits one by one before reentering the fax number. To
delete the number entirely, select the [C](Clear) key on the numeric
keys.
On Hook Select [On Hook] to connect to the telephone line.
When the FAX number has been entered, the machine starts dialing to
the receiving system.
After selecting this key, you can dial the number of the receiving system
using the numeric keys.
Manual Send (page 3-32)
To Next Page
Loading...
Need help?
General
