2-11
Before Using the Fax Machine > Quick Setup Wizard
Quick Setup Wizard
In quick setup mode, a wizard is used to configure the following settings. Be sure to complete the settings before using
the fax system.
FAX setup items
Step Setting item Description
Reference
Page
Dialing/RX Mode Dialing Mode
*1
(Port 1/Port 2
*2
)
Select the dialing mode according to the line type. 8-11
Reception Mode Select the reception mode. 8-13
Auto (DRD)
*3
Select the reception pattern. 8-13
Local Fax
Information
Local Fax Name (Fax
Port 1/Fax Port
*2
)
Register the local fax name printed on the fax on the
receiving system.
8-9
Local
Fax
Number
(Fax Port 1/Fax Port
*2
)
Enter the local fax number to be printed on the fax on
the receiving system.
8-9
Local Fax ID Enter the local fax ID. The local fax ID can limit other
parties with which you can communicate. Enter the four-
digit local FAX ID number.
8-9
TTI Select whether or not to print the local fax information on
the fax on the receiving system.
8-9
Volume Fax Speaker Volume Set the volume when selecting [On Hook].
Speaker Volume: Volume of the built-in speaker when
the line is connected by selecting [On Hook].
8-5
Fax Monitor Volume Set the monitor volume.
Monitor Volume: Volume of the built-in speaker when the
line is connected without selecting [On Hook] such as in
memory transmission.
8-5
Job Finish Emit a sound when a print job is normally completed. 8-5
Rings Rings(Normal)
*4
Set number of times to let phone ring before answering
a call.
8-12
Rings(TAD)
*4
Set number of times to let phone ring before switching
the FAX and the phone.
8-12
Rings(Fax/Phone)
*4
Set number of times to let phone ring before taking over
from the answering machine.
8-12
Paper Source/
Output
Paper Source Specify the paper type or cassette to be used for a print
output of the received fax.
When selecting [Specify by Cassette], refer to the
following.
Fax Exclusive Paper Source (page 8-10)
When selecting [Specify by Media Type], refer to the
following.
Media Type Setting (page 8-10)
8-10
Fax Port 1
Fax Port
*2
Select paper output for the received FAX.
*5
8-6