Kyocera FAX System 12 User Manual

12-18
Appendix > Received FAX Sizes and Paper Priority (Inch Model)
Received FAX Sizes and Paper Priority (Inch Model)
When no paper loaded in the cassettes matches the received fax size and orientation, the machine automatically
chooses the printing paper according to the following priority.
Same Size Override
If [Off] is set for Reduced RX Size, the printing paper is chosen by prioritizing the same size override.
Reduced RX Size (page 4-7)
Received FAX Size
Priority
Statement Letter Letter Legal Ledger Letter Long
Originals
*1
*1 Letter Long Originals: Originals longer than Letter in the direction of the paper feed.
Legal Long
Originals
*2
*2 Legal Long Originals: Originals longer than Legal in the direction of the paper feed.
Ledger Long
Originals
*3
*3 Ledger Long Originals: Originals longer than Ledger in the direction of the paper feed.
Paper Size
1 Statement
*4
*4 Paper orientation is different from the received document. The image is printed after being rotated 90°automatically.
Letter Letter Legal Ledger Ledger Legal Ledger
2 Letter Letter
*4
Letter
*4
Letter Letter Ledger Ledger Letter
3 Legal Legal Legal
*4
Letter
*4
Letter
*4
Letter Ledger Letter
*4
4 Letter
*4
Ledger Ledger Ledger Legal
*4
Letter
*4
Letter
*5
*5 The document is printed on this paper when the length of the document received is 376.6 to 379.3 mm and the cas-
sette set as the Legal size is empty.
indicates print output on two sheets.
Legal
*4
5 Ledger Statement
*4
Letter Statement
*4
Letter
6Letter
*4
Letter
*4
,
*5
7 Statement
*4
Letter
*4
8 Statement
*4
NOTE
When a paper type is selected in [Media Type], a received fax is printed using the matching paper source.
Media Type for Print Output (page 4-6)
Even if [Media Type] is selected, a received fax cannot be printed when the paper type loaded in the paper source is
not suitable for fax printouts.

Kyocera FAX System 12 Specifications

General

Brand	Kyocera
Model	FAX System 12
Category	Fax Machine
Language	English