Lantronix UDS2100 User Manual

Table of Contents
UDS2100 Device Server User Guide 5
Host List Configuration _________________________________________ 29
Channel 1 and Channel 2 Configuration ___________________________ 30
Serial Settings ____________________________________________ 30
Connection Settings - TCP ___________________________________ 33
Connection Settings - UDP ___________________________________ 36
Apply Settings _______________________________________________ 37
Apply Defaults _______________________________________________ 37
6: Configuration via Telnet or Serial Port (Setup Mode) 39
Accessing Setup Mode _________________________________________ 39
Telnet Connection _________________________________________ 39
Serial Port Connection ______________________________________ 40
Exiting Setup Mode ___________________________________________ 41
7: Setup Mode: Server Configuration 42
Server Configuration (Option 0) __________________________________ 42
IP Address _______________________________________________ 42
Set Gateway IP Address ____________________________________ 42
Netmask: Number of Bits for Host Part _________________________ 43
Set DNS Server IP Address __________________________________ 43
Change Telnet/Web Configuration Password ____________________ 43
DHCP Name ______________________________________________ 43
Enable DHCP FQDN Option _________________________________ 44
8: Setup Mode: Channel Configuration 45
Channel 1 (Option 1) __________________________________________ 45
Baudrate _________________________________________________ 45
I/F (Interface) Mode ________________________________________ 46
Flow ____________________________________________________ 46
Port Number ______________________________________________ 47
Connect Mode ____________________________________________ 47
Send the Escape Sequence (+++) in Modem Mode________________ 55
Show IP addr after 'RING' ___________________________________ 55
Auto Increment Source Port __________________________________ 55
Remote IP Address ________________________________________ 55
Remote Port ______________________________________________ 55
DisConnMode _____________________________________________ 55
Flush Mode (Buffer Flushing) _________________________________ 56
Pack Control ______________________________________________ 57
Packing Interval ___________________________________________ 58
Trailing Characters _________________________________________ 58
Send Characters ___________________________________________ 58
DisConnTime (Inactivity Timeout) _____________________________ 58
Send Characters ___________________________________________ 58

Lantronix UDS2100 Specifications

General

Isolation	1.5 kV
Certification	FCC, C/UL, CSA, VCCI, CE, TUV, CTick
Serial interface type	RS-232/422/485
Serial ports quantity	2
Ethernet LAN data rates	10, 100 Mbit/s
Electrostatic Discharge (ESD) protection	15 kV
USB 2.0 ports quantity	0
Supported network protocols	ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, SNMP TCP, UDP, Telnet, TFTP, RFC2217
Built-in processor	Lantronix DSTNI-EX
Processor frequency	48 MHz
Compatible operating systems	Windows 98/ME/NT/2000/XP
Flash memory	2 MB
RAM capacity	0.256 MB
LED indicators	LAN, Y
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	0 - 60 °C
Operating relative humidity (H-H)	10 - 90 %
Input voltage	9 - 30 V

Weight and Dimensions

Weight	400 g
Dimensions (WxDxH)	72 x 23 x 95 mm