Lantronix UDS2100 User Manual

Table of Contents
UDS2100 Device Server User Guide 6
Telnet Terminal Type _______________________________________ 59
Channel (Port) Password ____________________________________ 59
9: Setup Mode: Advanced Settings 60
Expert Settings (Option 5) ______________________________________ 60
TCP Keepalive Time In Seconds ______________________________ 60
ARP Cache Timeout In Seconds ______________________________ 60
CPU Performance _________________________________________ 60
Disable Monitor Mode at Bootup ______________________________ 61
HTTP Port Number _________________________________________ 61
MTU Size ________________________________________________ 61
TCP Re-Transmission Timeout _______________________________ 61
Enable Alternate MAC ______________________________________ 61
Ethernet Connection Type ___________________________________ 61
Security Settings (Option 6) _____________________________________ 62
Disable SNMP ____________________________________________ 62
SNMP Community Name ____________________________________ 62
Disable Telnet Setup _______________________________________ 62
Disable TFTP Firmware Update _______________________________ 63
Disable Port 77FE (Hex) _____________________________________ 63
77FEh Access Mode _______________________________________ 63
Disable Web Server ________________________________________ 63
Disable Web Setup _________________________________________ 64
Disable ECHO Ports ________________________________________ 64
Enable Enhanced Password _________________________________ 64
Default Settings (Option 7) ______________________________________ 64
Channel 1 & 2 Configuration Defaults __________________________ 64
Expert Settings Defaults _____________________________________ 64
Security Settings Defaults ___________________________________ 65
10: Firmware Upgrades 66
Obtaining Firmware ___________________________________________ 66
Reloading Firmware ___________________________________________ 66
Using TFTP: Graphical User Interface __________________________ 66
Using TFTP: Command Line Interface __________________________ 67
Recovering the Firmware Using the Serial Port and DeviceInstaller ___ 67
11: Monitor Mode 69
Entering Monitor Mode Using the Serial Port _____________________ 69
Entering Monitor Mode Using the Network Port ___________________ 69
Monitor Mode Commands ___________________________________ 69

Lantronix UDS2100 Specifications

General

Isolation	1.5 kV
Certification	FCC, C/UL, CSA, VCCI, CE, TUV, CTick
Serial interface type	RS-232/422/485
Serial ports quantity	2
Ethernet LAN data rates	10, 100 Mbit/s
Electrostatic Discharge (ESD) protection	15 kV
USB 2.0 ports quantity	0
Supported network protocols	ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, SNMP TCP, UDP, Telnet, TFTP, RFC2217
Built-in processor	Lantronix DSTNI-EX
Processor frequency	48 MHz
Compatible operating systems	Windows 98/ME/NT/2000/XP
Flash memory	2 MB
RAM capacity	0.256 MB
LED indicators	LAN, Y
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	0 - 60 °C
Operating relative humidity (H-H)	10 - 90 %
Input voltage	9 - 30 V

Weight and Dimensions

Weight	400 g
Dimensions (WxDxH)	72 x 23 x 95 mm