Safety information
2-2
48XX/49XXSHB0399
2.1 Persons responsible for the safety
Operator
( An operator is any natural or legal person who uses the drive system or on
behalf of whom the drive system is used.
( The operator or his safety officer are obliged to ensure that
- all relevant regulations, notes and laws are observed
- only qualified personnel work on and with the drive system.
- the personnel have the Operating Instructions available for all
corresponding operations and
- unqualified personnel are prohibited from working with and on the
controller.
Qualified personnel
Qualified personnel are persons who - because of their education, experience,
instruction, and knowledge about corresponding standards and regulations, rules
for the prevention of accidents, and operating conditions - are authorized by the
person responsible for the safety of the plant to perform the required actions and
who are able to recognize and avoid potential hazards.
(see IEC 364, definition of qualified personnel)
To Next Page
Loading...
Need help?
General
