This Manual applies to the following PLCs:
Type as from hardware version as from software version
9300 Servo PLC EVS93XX-xl 2l 2.0
9300 Servo PLC EVS93XX-xT 2K 2.0
Important note :
The software is supplied to the user as described in this document. Any risks resulting from its quality or use remain the responsibility of the
user. The user must provide appropriate safety measures to protect against possible maloperation.
We do not accept any liability for direct or indirect damage, e.g. profit loss, order loss or any commercial losses.
ã 2002 Lenze Drive Systems GmbH
No part of this documentation may be copied or made availa ble to third parties without the explicit written a pproval of
Lenze Drive Systems GmbH.
All information given in this online documentation has been carefully selected and tested for compliance with the hardware and software
described.Deviationscan, however, notbecompletelyexcluded.Wedo not accept any responsibilityor liability forany damagethat mayoccur.
Required corrections will be included in updates of this documentation.
Windows, Windows NT and MS-DOS are either registered trademarks or trademarks of Microsoft Corporation in the U.S.A and/or other coun-
tries.
All other brand names are trademarks of the corresponding owners.
Version 2.0 11/2001
efesotomasyon.com - Lenze
To Next Page
Loading...
Need help?
General