Lenze Global Drive 9300 Servo PLC Series User Manual

9300 Servo PLC
System blocks
2.3 AIF3_IO_AutomationInterface
2-11
L
ServoPLC EN 2.0
2.3 AIF3_IO_AutomationInterface
2.3.1 Inputs_AIF3
Automation interface (module number 43)
This SB is used as interface for input signals (e. g. setpoints/actual values) from attached fieldbus
modules (e. g. INTERBUS, PROFIBUS-DP).
• Theprocessimageis
– created every 10 ms.
– created in an interval task within the time set for this task.
– read at the beginning of the task and written at its end.
Tip!
Please observe the corresponding Operating Instructions for the fieldbus module that is plugged in.
Inputs_AIF3
Automation
Interface
AIF3_bInB0_b
AIF3_bInB15_b
AIF3_nInW1_a
16 Bit
...
16 binary
signals
Byte
1
Byte
2
Byte
3
Byte
4
Byte
5
Byte
6
Byte
7
Byte
8
AIF3_bInB16_b
AIF3_bInB31_b
AIF3_nInW2_a
16 Bit
...
16 binary
signals
16 Bit
LowWord
16 Bit
HighWord
AIF3_nInW3_a
AIF3_dnInD1_p
16 Bit
16 Bit
AIF3_nInW4_a
Fig. 2-5 Inputs_AIF3
efesotomasyon.com - Lenze
Show/Hide Bookmarks

Lenze Global Drive 9300 Servo PLC Series Specifications

General

Brand	Lenze
Model	Global Drive 9300 Servo PLC Series
Category	DC Drives
Language	English