Lenze Global Drive 9300 Servo PLC Series User Manual

9300 Servo PLC
Preface and general information
1-1
l
ServoPLC EN 2.0
1 Preface and general information
1.1 About this Manual
This Manual describes the system block functions which can be selected and parameterised in the
control configuration of the Drive PLC Developer Studio (DDS) for 9300 Servo PLC
1.1.1 Conventions used in this Manual
This Manual uses the following conventions to distinguish between different types of information:
Information type Distinction (in text) Example
System block name bold The DIGITAL_IO ...
System block variable identifier italics The input DIGIN_bIn1_b ...
Tip!
For information about the conventions used for variables of Lenze system organisation units,
function blocks and functions can be obtained from the appendix of the DDS online documentation
“Introduction into IEC61131-3 programming”. The conventions ensure universal and uniform
labelling and support the readability of PLC programs.
1.1.2 System block descriptions
All system block descriptions given in this Manual have the same structure:
 Headline with SB identifier



 SB function and module number


 Short description of the SB and its most important features

 System bloc k chart including all corresponding variables
• Input variables
• Output variables

 Table giving information about input and output variables:
• Identifier
• Data type
• Signal type
• Address
• Display code
• Display format
• Info
 Detailed SB description
efesotomasyon.com - Lenze
Show/Hide Bookmarks

Lenze Global Drive 9300 Servo PLC Series Specifications

General

Brand	Lenze
Model	Global Drive 9300 Servo PLC Series
Category	DC Drives
Language	English