HDMI-3D-OPT series – User's Manual 46
View Connection State on the Output
Description
outputs.
Example
●
●●
(ALLA 06 06)
Legend: O01 shows the corresponding output’s connection state.
<layer> Layer
A Audio layer
State letters:
Letter State Example
L Output is locked L01
M Output is muted M01
U Output is locked and muted U01
Explanation: I4 video input port is connected to the video output ports and I6 audio input port is connected
to the audio output ports.
View Crosspoint Size
Description: Shows the physical crosspoint size.
Example
Command {getsize●
●
(SIZE=6x2 A)
Legend:
See details in the previous section.
Explanation: The device reports that it has a video crosspoint with 4 inputs and 2 outputs and an audio
crosspoint with 6 inputs and 2 outputs.
Change Video Autoselect Mode
Description: The autoselect mode of the video outputs can be changed.
Example
{as_v1=E;P}
Legend: The output port numbers are listed in section.
Letter <state> Letter <mode>
F First detect mode E Autoselect mode is enabled
P Priority detect mode D Autoselect mode is disabled
L Last detect mode
Explanation: The Autoselect mode of video output 1 and output 2 is enabled and set to Priority mode.
Change Audio Autoselect Mode
Description: The autoselect mode of the audio outputs can be changed.
Example
{as_a1=E;P}
(AS_A1=E;P)
(AS_A2=E;P)
Legend: The output port numbers are listed in section.
Letter <state> Letter <mode>
F First detect mode E Autoselect mode is enabled
P Priority detect mode D Autoselect mode is disabled
L Last detect mode
Explanation: The Autoselect mode of audio output 1 and output 2 is enabled and set to Priority mode.
To Next Page
Loading...
Need help?
General
