Channel Setup
MXD70 Suspended Solids / Turbidity
Setup and Operating Guide
- 13 -
Channel Setup
Simulated Input
See Simulated Channels section of the Setpoints,
Current Outputs, Digital Inputs Configuration Guide
for more information.
/ – Select Option
EXIT
– Return to Select Setup Channel
– Enter Option
Input Filtering (Averaging)
When very noisy environments are encountered, this
function will allow the user to filter the sensor
readings by taking a running average over the time
period selected (from 1 to 32 seconds).
/ – Select Option
EXIT
– Cancel
– Save Selection
CIP Input
When assigned to a suspended solids channel the MXD70 series digital inputs feature a CIP function.
This CIP input indicates to the instrument that a CIP event is in progress so that the sensor can be
disabled so not to cause overstressing of the probe. For further information about setting the CIP input
please consult the Setpoints, Current Outputs and Digital Input Configuration Guide.
To Next Page
Loading...
Need help?
General
