Seating variants facing forwards
Seating variants in the face-to-face position
EE
EASY-ENTRY/EXIT feature
S/L
Seat/berth combination
BV
Bed extension
If a rear bench seat is marked withEE in the
illustrations, a rear bench seat must be fitted
with the EASY-ENTRY/EXIT feature in the posi-
tion indicated.
If a rear bench seat is not marked, a rear bench
seat can be fitted with or without an EASY-
ENTRY/EXIT section in the position indicated.
Please observe the following conditions for safe
rear seating:
R
Only use rear bench seats approved for the
vehicle.
R
A rear bench seat with three seats without
EASY-ENTRY/EXIT feature may only be fitted
if there is no other row of rear seats behind it.
R
A rear bench seat may only be fitted facing the
rear if each seat has a seat opposite it – face-
to-face position.
R
Vehicles with individual seat anchorages
in the vehicle floor:
-
Either only standard bench seats or only
comfort bench seats may be fitted. Mixed
fitting is not permitted.
-
Passengers may only use the seats if the
rear bench seat has engaged correctly
(Y page 103).
R
Vehicles with a seat rail system in the
vehicle floor:
-
Either only comfort rear bench seats or only
the seat/bunk combination (S/L) may be
fitted. Mixed fitting is not permitted.
-
Passengers may only use the seats if the
rear bench seat has engaged correctly
(Y page 104).
EASY-ENTRY/EXIT feature
G
WARNING
If the rear bench seat is not fully engaged, it
may be thrown about while the vehicle is mov-
ing. There is a risk of an accident and injury.
Always make sure that the rear bench seat is
fully engaged as described.
G
WARNING
When adjusting a seat, you or another vehicle
occupant could become trapped by the guide
rail of the seat, for instance. There is a risk of
injury.
Make sure that no one has any part of their
body within the sweep of the seat when
adjusting it.
98
Seats
Seats, steering wheel and mirrors
To Next Page
Loading...
Need help?
General
