Ratchet strap
Tensioning lever fastened in detent position
Always observe the operating instructions or the
notes of the manufacturer for the operation of
the ratchet strap.
X
To release the tensioning lever: press stop
slider = outwards in the direction of the
arrow and swing tensioning lever ; from
detent position 1 to the desired position.
X
To tighten the ratchet strap: release ten-
sioning lever ; and open it.
Threading and tensioning
X
Guide ratchet strap ? through slotted shaft
A from behind as illustrated and tighten it.
X
Swing tensioning lever ; back and forth until
the ratchet strap has wound around slotted
shaft A two to three times.
X
Press stop slider = outwards in the direction
of the arrow and swing tensioning lever ; to
detent position 1.
X
Release stop slider =.
The ratchet is closed and engaged.
Tensioning lever in the release position
X
To release the ratchet strap: release ten-
sioning lever ; and swing it into release
position 7.
Lock stop slider = engages in end recess B
and slotted shaft A can move freely.
X
Pull ratchet strap ? out of the ratchet.
Load-securing aids
Load protection net
G
WARNING
The load protection net alone cannot restrain
or secure heavy objects, luggage or heavy
loads. In the event of abrupt changes in direc-
tion, braking manoeuvres or an accident, you
may be struck by unsecured loads. There is a
risk of injury, possibly even fatal.
Always stow objects in such a way that they
cannot be tossed about. Secure objects, lug-
gage and loads to prevent them slipping or
tipping over, e.g. by lashing them down, even
when using the load protection net.
318
Load-securing aids
Transporting loads with the vehicle
To Next Page
Loading...
Need help?
General
