X
Press : or 9 to select the Rain sen‐
sor sensitivity function.
The display shows the current setting.
X
Press a to change the setting.
X
Press : or 9 to select the Sensitive,
Standard or Insensitive setting. This set-
ting controls the rain sensor's sensitivity to
precipitation. As a result, the windscreen
wiper wipes more or less often at the same
precipitation intensity.
X
Press the a button to store the entry.
You can find further information under "Wind-
screen wipers" (Y page 128).
Setting permanent SPEEDTRONIC
Using the steering wheel buttons
X
Press = or ; to select the Sett.
menu.
X
Press : or 9 to select Vehicle.
X
Press a to confirm.
X
Press : or 9 to select the Limit
speed (winter tyres) function.
The display shows the current setting.
X
Press a to change the setting.
X
Press : or 9 to adjust permanent
SPEEDTRONIC in increments of ten
(210 km/h to 160 km/h). Selecting the Off
setting switches permanent SPEEDTRONIC
off.
X
Press the a button to store the entry.
Further information can be found under "Per-
manent SPEEDTRONIC" (Y page 191).
Switching the automatic locking feature
on/off
Use the steering wheel buttons.
X
Press = or ; to select the Sett.
menu.
X
Press : or 9 to select Vehicle.
X
Press a to confirm.
X
Press : or 9 to select the Automatic
door lock function.
The current status is shown.
X
To activate/deactivate: press a again.
If you activate the Automatic door lock func-
tion, your vehicle will lock automatically from a
speed of approximately 15 km/h.
You can find further information under "Auto-
matic door lock" (Y page 82).
Activating/deactivating the acoustic
locking confirmation
Using the steering wheel buttons
X
Press = or ; to select the Sett.
menu.
X
Press : or 9 to select Vehicle.
X
Press a to confirm.
X
Press : or 9 to select Acoustic
locking confirmation.
The current status is shown.
X
To activate/deactivate: press a again.
If you activate the Acoustic locking con‐
firmation function, an acoustic tone sounds
when the vehicle is locked.
Convenience submenu
Activating/deactivating the seat-belt
adjustment function
Using the steering wheel buttons
X
Press = or ; to select the Sett.
menu.
X
Press : or 9 to select Convenience.
X
Press a to confirm.
X
Press : or 9 to select the Belt
adjustment function.
The display shows the current status.
X
To activate/deactivate: press a again.
If you activate the Belt adjustment function,
the driver's and front-passenger seat belts are
adjusted to the upper body of the occupants.
You can find further information about the belt
adjustment convenience function under "Seat
belt" (Y page 50).
Restoring the factory settings
Use the steering wheel buttons.
X
Press = or ; to select the Settings
menu.
X
Press : or 9 to select Factory set‐
ting.
X
Press a to confirm.
The Reset all settings? function is dis-
played.
X
Press : or 9 to select No or Yes.
X
Press a to confirm the choice.
If you select Yes, the display shows a confir-
mation message.
242
On-board computer (vehicles with steering wheel buttons)
On-board computer and displays
To Next Page
Loading...
Need help?
General
