Switching on parking lamps
X
Turn the key to position 0 (Y page 159) in the
ignition lock or remove the key.
X
Right-hand parking lamp: turn the light
switch to position X.
X
Left-hand parking lamp: turn the light
switch to position W.
Combination switch
Turn signal
:
Right turn signal
;
Left turn signal
X
To indicate: press the combination switch in
desired direction : or ; until it engages.
The combination switch automatically returns
to its original position after large steering
movements.
X
To indicate briefly: press the combination
switch briefly in desired direction : or ;.
The corresponding turn signal flashes three
times.
Main-beam headlamps and headlamp
flasher
:
Main-beam headlamps
;
Headlamp flasher
X
To switch on the main-beam headlamps:
turn the light switch to L or Ã.
X
Press the combination switch forwards :.
The K indicator lamp in the instrument
cluster lights up.
i
In the à position, the main-beam head-
lamps are only switched on when it is dark and
the engine is running.
X
To switch off the main-beam headlamps:
move the combination switch back to its nor-
mal position.
The K indicator lamp in the instrument
cluster goes out.
X
To operate the headlamp flasher: turn the
key to position 1 or 2 in the ignition lock.
X
Pull the combination switch briefly in the
direction of arrow ;.
Headlamp range adjustment
X
Turn headlamp range control : to the cor-
responding position. The road should be illu-
minated from 40 m to 100 m and the dipped-
116
Exterior lighting
Lights and windscreen wipers
To Next Page
Loading...
Need help?
General
