X
Press : or 9 to select the AdBlue
level submenu.
X
Press a to confirm.
The display shows the level of AdBlue
®
.
You can find information on refilling AdBlue
®
under "Refuelling" (Y page 174).
Settings menu
Introduction
Depending on the vehicle’s equipment, you have
the following options in the Settings menu:
R
changing the display options in the Inst.
cluster submenu (Y page 239)
R
changing the time and date in the Time/date
submenu (Y page 240)
R
changing the exterior and interior lighting set-
tings in the Light submenu (Y page 240)
R
activating/deactivating or adjusting vehicle
functions in the Vehicle submenu
(Y page 241)
R
setting up to three departure times for the
hot-water auxiliary heater in the Heating
submenu (Y page 147)
R
activating/deactivating belt adjustment in
the Convenience submenu (Y page 242)
R
resetting the settings to Factory setting
(Y page 242)
Instrument cluster submenu
Selecting the unit for the distance
Using the Display unit Speed-/odometer:
function, you can select whether the display
shows certain information in kilometres or
miles.
Use the steering wheel buttons.
X
Press = or ; to select the Settings
menu.
X
Press : or 9 to select Inst. clus‐
ter.
X
Press a to confirm.
X
Press : or 9 to select the Display
unit Speed-/odometer: function.
The display indicates the selected km or
miles setting.
X
Press a to change the setting.
The selected distance units are used for:
R
Digital speedometer in the Trip menu
R
Total distance recorder and trip meter
R
Trip computer
R
Current consumption and range
R
Navigation instructions in the Navi menu
R
CRUISE CONTROL
R
SPEEDTRONIC
R
Service interval display
Setting the display language
Using the steering wheel buttons
X
Press = or ; to select the Sett.
menu.
X
Press : or 9 to select Instrument
cluster.
X
Press a to confirm.
X
Press : or 9 to select Language.
The display shows the current language selec-
tion for all display messages.
X
Press a to change the setting.
X
Press : or 9 to select the desired lan-
guage.
X
Press the a button to save the selection.
Selecting the permanent display function
United Kingdom only:
This function is not available. The display per-
manently shows the digital speed in km/h in the
header. The outside temperature is displayed
with the odometers (Y page 231).
If the display shows the speed in the header, the
display beside the trip odometer also shows the
outside temperature.
For all countries except the United Kingdom:
Using the Permanent display: function, you
can switch the display in the header between
outside temperature and speed.
On-board computer (vehicles with steering wheel buttons)
239
On-board computer and displays
Z
To Next Page
Loading...
Need help?
General
