X
To remove tools: release clamping strap ;.
X
Remove tool holder cover :.
X
Carefully pull the tool kit and jack out of the
tool holder.
X
To stow tools: before stowing, wind the jack
to the fully closed position and place it so that
the hand wheel is facing forwards and the
plate is facing inwards.
X
Place the jack and vehicle tool kit into the tool
holder.
X
Replace tool holder cover :.
X
Tighten clamping strap ;.
Separate holder for jack
Holder for jack in the luggage compartment on the
right-hand side of the vehicle
The vehicle tool kit or tyre-changing tools are in
the seat base of the left front seat (Y page 346).
X
To remove the jack: release clamping
strap :.
X
Pull jack ; out of the upper holder and from
the lower fixture =.
X
To stow the jack: before stowing, wind the
jack to the fully closed position and place it so
that the hand wheel is facing forwards and the
plate is facing inwards.
X
Place jack ; onto lower fixture =.
X
Press jack ; into the upper holder and fasten
clamping strap :.
The jack is secured.
Warning triangle
Removing the warning triangle
The warning triangle is located in the stowage
compartment in the driver's door.
Setting up the warning triangle
X
Fold stand = out sideways from the bottom.
X
Pull side reflectors ; upwards to form a tri-
angle and lock them at the top using press-
stud :.
i
When using the warning triangle you must
observe the legal requirements for the coun-
try in which you are currently driving.
First-aid kit
Removing the first-aid kit
The first-aid kit is located in the stowage com-
partment in the co-driver's door.
i
Check the expiry date on the first-aid kit at
least once a year. Replace any expired or
missing contents.
Observe the legal requirements of the country
in which you are currently driving.
Fire extinguisher
Removing the fire extinguisher
348
Where will I find...?
Breakdown assistance
To Next Page
Loading...
Need help?
General
