X
Press : or 9 to set Deactivated,
Standard or Sensitive.
X
Press a to confirm the choice.
If ATTENTION ASSIST is activated, the À
symbol is shown in the status area of the dis-
play. The selection Standard or Sensitive
sets the sensitivity with which the system
determines the attention level.
Further information can be found under "ATTEN-
TION ASSIST" (Y page 199).
Activating/deactivating Blind Spot
Assist
Using the steering wheel buttons
X
Press = or ; to select the Assist.
menu.
X
Press : or 9 to select Blind Spot
Assist.
X
Press a to confirm.
The current status is shown.
X
To activate/deactivate: press the a but-
ton again.
Further information can be found under "Blind
Spot Assist" (Y page 196).
Setting Lane Keeping Assist
Using the steering wheel buttons
X
Press = or ; to select the Assist.
menu.
X
Press : or 9 to select Lane Keeping
Assist.
X
Press a to confirm.
The current selection Standard or Adaptive
is displayed.
X
To change the setting: press a again.
Further information can be found under "Lane
Keeping Assist" (Y page 198).
Service menu
Overview
Depending on the vehicle’s equipment, you have
the following options in the Service menu:
R
Calling up display messages in the message
memory (Y page 259)
R
Restarting the tyre pressure loss warning sys-
tem or checking the tyre pressure electroni-
cally (Y page 361)
R
Calling up the service due date (ASSYST
PLUS) (Y page 333)
R
Checking the engine oil level electronically
(Y page 326)
R
Displaying the AdBlue
®
level in BlueTEC
®
vehicles (Y page 238)
Displaying the AdBlue
®
level
The display is only available for BlueTEC
®
vehi-
cles.
Use the steering wheel buttons.
X
Press = or ; to select the Service
menu.
X
Press a to confirm.
238
On-board computer (vehicles with steering wheel buttons)
On-board computer and displays
To Next Page
Loading...
Need help?
General
