Radio type approval for the tyre pres-
sure monitor
Country Radio type approval num-
ber
Argentina CNC: H-12336
Model: Schrader HSW4
Brazil 0381-13-8001
Model: GG4
Jordan Model: Mercedes
HS Snap in 433 MHz
Manufacturer:
Schrader Electronics Ltd.
Type Approval Number:
TRC/LPD/2013/48
Type Number: LPD
Country Radio type approval num-
ber
Morocco MR7907 ANRT 2013
05/03/2013
Moldova 1024
Philippines No: ESD-1306995C
Serbia И 011 13
Singapore Compliance with
IDA Standard DA-103365
South Africa TA-2013/461
United Arab
Emirates
Abu Dhabi
and Dubai
TRA, Registered NO:
ER0104996/13
Dealer NO: DA0047074/10
Tyre pressure tables
Vehicles with a gross vehicle weight of 2.8 t
!
The pressure difference between tyres on any one axle must be no greater than 10 kPa (0.1 bar/
1.5 psi).
The following tyre pressure values apply to vehicles with:
R
a permissible gross vehicle weight of 2.8 t
R
a permissible axle load of 1490 kg on the front and rear axles and
R
the tyres referred to under "Wheel and tyre combinations" (Y page 373)
Always observe the notes under "Information on tyre pressure" (Y page 359).
Tyre pressure for the spare wheel is 350 kPa (3.5 bar/51 psi).
Partially laden vehicle Fully laden vehicle
Tyre size Front axle Rear axle Front axle Rear axle
195/65 R 16 C 320 kPa
(3.2 bar/
46 psi)
340 kPa
(3.4 bar/
49 psi)
360 kPa
(3.6 bar/
52 psi)
360 kPa
(3.6 bar/52 psi)
205/65 R 16 C 300 kPa
(3.0 bar/
44 psi)
310 kPa
(3.1 bar/
45 psi)
340 kPa
(3.4 bar/
49 psi)
340 kPa
(3.4 bar/49 psi)
225/60 R 16 C 280 kPa
(2.8 bar/
41 psi)
290 kPa
(2.9 bar/
42 psi)
320 kPa
(3.2 bar/
46 psi)
320 kPa
(3.2 bar/46 psi)
225/55 R 17 C 290 kPa
(2.9 bar/
42 psi)
310 kPa
(3.1 bar/
45 psi)
330 kPa
(3.3 bar/
48 psi)
330 kPa
(3.3 bar/48 psi)
364
Tyre pressure
Wheels and tyres