s number keys and press the 9 button to
confirm.
The Bluetooth
®
device is authorised.
X
Select Bluetooth
®
device name MB Blue-
tooth on the device.
X
Enter the number selected previously on the
Bluetooth
®
device, and confirm.
X
Confirm possible prompts using the Blue-
tooth
®
device.
The Authorisation successful message
is shown in the display. You will see the Blue-
tooth
®
name of the Bluetooth
®
device in the
display/selection window.
i
When the Authorisation failed mes-
sage is displayed, you may have exceeded the
prescribed time period. Repeat the proce-
dure.
If the pairing process was successful, the
Bluetooth
®
device is automatically connected
to the multimedia system.
Unpairing a Bluetooth
®
device
X
Press the : button, select Telephone/
BT audio using the = or ; button and
confirm by pressing the 9 button.
The Bluetooth telephones/Bluetooth
audio device list menu item is selected.
X
Press the 9 button.
The display shows the device list.
X
Press the ; button.
X
Press the : button to select the De-
authorise menu item and press the 9 but-
ton to confirm.
A prompt appears in the display asking
whether the Bluetooth
®
device should defi-
nitely be de-authorised.
X
To unpair: use the = or ; button to
select Yes and press the 9 button to con-
firm.
The display briefly shows a message. The
Bluetooth
®
device is unpaired and deleted
from the device list.
X
To cancel the unpairing process: use the
= or ; button to select No and press
the 9 button to confirm.
The Bluetooth
®
device is not unpaired from
the multimedia system. You have cancelled
the process.
Ending a Bluetooth
®
connection
i
If you end the Bluetooth
®
connection, the
Bluetooth
®
device is not deleted from the
multimedia system memory.
A Bluetooth
®
connection can be ended in the
following ways:
R
deactivate the Bluetooth
®
function of the
multimedia system.
R
deactivate the Bluetooth
®
function of your
Bluetooth
®
device.
R
switch off the multimedia system.
R
switch off the Bluetooth
®
device.
Media mode
Memory card audio playback
X
To insert the SD memory card: insert the
SD memory card into the SD slot with the
contacts at the front and facing downwards.
X
Press the Õ button repeatedly until SD
appears in the display.
Playback starts.
i
If the multimedia system cannot find any
readable files on the SD memory card, the
display shows No playable files.
X
To remove the SD memory card: press the
SD memory card.
The multimedia system ejects the SD memory
card.
USB device audio playback
The connection for USB devices is located in the
left-hand stowage compartment, next to the
multimedia system.
X
Connect the USB device correctly to the USB
port.
X
Press the Õ button repeatedly until USB
appears in the display.
Playback starts.
i
Due to the wide range of USB devices avail-
able on the market, playback cannot be guar-
anteed for all USB device brands.
Audio 10
295
Multimedia systems in brief
Z
To Next Page
Loading...
Need help?
General
