Adjusting the head restraints manually
X
To raise: pull the head restraint up to the
desired position.
X
To lower: press release knob : and slide the
head restraint down to the desired position.
X
To move the driver's or co-driver's head
restraint forwards: pull the head restraint
forwards until it engages in the desired posi-
tion.
X
To move the driver's or co-driver's head
restraint backwards: press and hold down
release knob ; and slide the head restraint
back to the desired position.
X
Let go of release button ;.
X
Ensure that the head restraint has engaged
properly.
The head restraints can be removed and fitted
as follows.
X
To remove: pull the head restraint up to the
stop.
X
Press release knob : and pull out the head
restraint.
X
To fit: insert the head restraint so that the rod
with the detents is on the left when viewed in
the direction of travel.
X
Push the head restraint down until it engages.
Adjusting the head restraints electri-
cally
!
Do not adjust the height of the electrically
adjustable head restraint by hand. You could
otherwise damage the head restraint's mech-
anism.
Control panel on the door trim
X
To adjust the height: turn the key in the igni-
tion lock to position 2.
or
X
Open the door.
X
Slide switch : up or down in the direction of
the arrow.
i
If the ignition is not switched on, you can
adjust the head restraint height within
30 seconds of unlocking the vehicle.
X
To move forwards: pull the head restraint
forwards until it engages in the required posi-
tion.
X
To move backwards: press and hold down
release knob ; and slide the head restraint
back to the desired position.
X
Let go of release button ;.
X
Ensure that the head restraint has engaged
properly.
108
Seats
Seats, steering wheel and mirrors
To Next Page
Loading...
Need help?
General
