Device Configuration
5-49
Figure 5-27 Profile Overrides - Network DNS screen
6. Provide or override the default Domain Name used when resolving DNS names. The name cannot
exceed 64 characters.
7. Set or override the following DNS configuration data:
8. Select OK to save the changes and overrides made to the DNS configuration. Select Reset to revert to
the last saved configuration.
NOTE: A blue override icon (to the left of a parameter) defines the parameter as having
an override applied. To revert the override back to its original profile setting, select the
override icon to display an Action pop-up. Select the Remove Override checkbox to
revert the override to its original setting for this profile.
Enable Domain
Lookup
Select the radio button to enable DNS. When enabled, human friendly domain
names can be converted into numerical IP destination addresses. The radio
button is selected by default.
Name Servers Provide a list of up to three DNS servers to forward DNS queries if DNS
resources are unavailable. The DNS name servers are used to resolve IP
addresses. Use the Clear link next to each DNS server to clear the DNS name
server’s IP address from the list.