Motorola Solutions AP-6511 Access Point System Reference Guide
6-30
• Authorization policies can also apply bandwidth restrictions and assign Firewall policies to users and
devices.
6.1.6 Configuring Advanced WLAN Settings

Wireless LAN Policy
To configure advanced settings on a WLAN:
1. Select Configuration > Wireless LANs > Wireless LAN Policy to display a high-level display of the
existing WLANs available to the wireless controller managed network.
2. Select the Add button to create an additional WLAN or select Edit to modify the properties of an existing
wireless controller WLAN.
3. Select Advanced.
Figure 6-14 WLAN Policy Advanced screen
4. Refer to the Protected Management Frames field to set a frame protection mode and security
association for the WLAN’s advanced configuration.
During a security association (SA) negotiation, the wireless controller and recipient gateways agree to
use a particular transform set to protect data flow. A transform set is a combination of security protocols
and algorithms. During an IPSec security association negotiation, peers agree to use a particular
transform set for protecting the wireless controller managed data flow.
Mode Select a radio button option to determine whether management frames are
continually or optionally protected. Disabled is the default setting.
To Next Page
Need help?
General
