Motorola Solutions AP-6511 Access Point System Reference Guide
13-44
13.3.10.3 DHCP Options

Network
An AP-6511 can use a DHCP server resource to provide the dynamic assignment of IP addresses
automatically. This is a protocol that includes IP address allocation and delivery of host-specific configuration
parameters from a DHCP server to a host. Some of these parameters are IP address, gateway and network
mask.
The DHCP Options screen provides the DHCP server name, image file on the DHCP server, and its
configuration.
To view a network’s DHCP Options:
1. Select the Statistics menu from the Web UI.
2. Select the System tab from the left navigation pane and then select the Access Point node.
3. Select Network and expand the menu to reveal its sub menu items.
4. Select DHCP Options.
Figure 13-28 Access Point Network - DHCP Options screen
The DHCP Options screen displays the following:
Server
Information
Displays the IP address of the DHCP server.
Image File Displays the image file name. BOOTP or the bootstrap protocol can be used
to boot diskless clients. An image file is sent from the boot server. The image
file contains the image of the operating system the client will run. DHCP
servers can be configured to support BOOTP.
Configuration Displays the name of the configuration file on the DHCP server.
Cluster
Configuration
Displays the name of the cluster configuration file on the DHCP server if the
server is a part of a cluster.
To Next Page
Loading...
Need help?
General
