Motorola Solutions AP-6511 Access Point System Reference Guide
7-36
7.4 Profile Security Configuration
An Access Point profile can have its own firewall policy, wireless client role policy, WEP shared key
authentication and NAT policy applied. If an existing firewall, client role or NAT policy is unavailable, an
administrator can be navigated from the Configuration > Profiles section of the UI to the Configuration
> Security portion of the UI to create the required security policy configuration. Once created, separate
policies can be applied to the profile to best support the data protection and security requirements in respect
to the Access Point model supported by the profile.
For more information, refer to the following sections:
• Defining Profile Security Settings
• Setting the Certificate Revocation List (CRL) Configuration
• Setting the Profile’s NAT Configuration
7.4.1 Defining Profile Security Settings

Profile Security Configuration
A profile can leverage existing firewall, wireless client role and WIPS policies and configurations and apply
them to the profile’s configuration. This affords each profile a truly unique combination of data protection
policies best meeting the data protection requirements of that profile.
To define a profile’s security settings:
1. Select the Configuration tab from the Web UI.
2. Select Profiles from the Configuration tab.
3. Either select Add if creating a new profile or Edit if modifying the configuration on an existing profile.
4. Select Security.
5. Select Settings.
To Next Page
Loading...
Need help?
General
