Motorola AP-6511 User Manual

Security Configuration
8-21
Figure 8-13 WIPS Signatures Configuration screen
20.If adding a new WIPS signature, define a Name to distinguish it from others with similar configurations.
The name cannot exceed 64 characters.
21.Set the following network address information for a new or modified WIPS Signature:
Enable Signature Select the radio button to enable the WIPS signature for use with the
profile. The default signature is enabled.
BSSID MAC Define a BSS ID MAC address used for matching purposes.
Source MAC Define a source MAC address for the packet examined for matching
purposes.
Destination MAC Set a destination MAC address for the packet examined for matching
purposes.
Frame Type to Match Use the drop-down menu to select a frame type matching with the WIPS
signature.
Match on SSID Sets the SSID used for matching. Ensure it’s specified properly or the SSID
won’t be properly filtered.
SSID Length Set the character length of the SSID used for matching purposes. The
maximum length is 32 characters.

Motorola AP-6511 Specifications

General

Brand	Motorola
Model	AP-6511
Category	Wireless Access Point
Language	English