Management Access Policy Configuration
10-13
3. Set the SNMP v1/v2 Community String configuration. Use the + Add Row function as needed to add
additional SNMP v1/2 community strings, or select an existing community string’s radio button and select
the Delete icon to remove it.
4. Set the SNMPv3 Users configuration. Use the + Add Row function as needed to add additional SNMP
v3 user configurations, or select a SNMP user’s radio button and select the Delete icon to remove the
user.
5. Select OK to update the SNMP configuration. Select Reset to revert to the last saved configuration.
Community Define a public or private community designation. By default, SNMPv2
community strings on most devices are set to public for the read-only
community string and private for the read-write community string.
Access Control Set the access permission for each community string used by devices to
retrieve or modify information. The available options include:
Read Only -Allows a remote device to retrieve information
Read-Write - Allows a remote device to modify settings
User Name Use the drop down menu to define a user name of either snmpmanager,
snmpoperator or snmptrap.
Authentication Displays the authentication scheme used with the listed SNMPv3 user.
The listed authentication scheme ensures only trusted and authorized
users and devices are permitted access.
Encryption Displays the encryption scheme used with the listed SNMPv3 user. The
listed encryption scheme ensures data is protected when forwarded over
insecure interfaces like HTTP.
Password Provide the user’s password in the field provided. Select the Show radio
button to display the actual character string used in the password. Leaving
the radio button unselected protects the password and displays each
character as “*”.
To Next Page
Loading...
Need help?
General
