Operations
12-3
Figure 12-1 Device Details screen
Refer to the following to determine whether a firmware image needs to be updated for the selected device,
or a device requires a restart or revert to factory default settings.
Device MAC Displays the factory assigned hardware MAC address (in the banner of the
screen) for the selected device. The Device Type also displays in the
banner of the screen.
Firmware Version Displays the primary and secondary firmware image version form the
AP6511.
Build Date Displays the date the primary and secondary firmware image was built for
the selected device.
Install Date Displays the date the firmware was installed for the selected device.
Current Boot Lists whether the primary or secondary firmware image is to be applied to
the device the next time the device boots.
Next Boot Use the drop-down menu to select the firmware image to boot the next
time the device reboots. Select either the Primary or the Secondary
image.
Fallback Lists whether fallback is currently enabled for the selected device. When
enabled, the device reverts back to the last successfully installed firmware
image if something were to happen in its next firmware upgrade that
would render the device inoperable.
To Next Page
Loading...
Need help?
General
