Motorola Solutions AP-6511 Access Point System Reference Guide
5-26
8. Select the Create icon to define a new Smart RF policy that can be applied to the RF Domain or select
the Edit icon to modify or override an existing Smart RF policy.
For an overview of Smart RF and instructions on how to create a Smart RF policy that can be used with
a RF Domain, see Smart RF Policy on page 6-55.
9. Use the WIPS Policy drop down menu to apply a WIPS policy to the RF Domain.
The AP-6511 supports Wireless Intrusion Protection System (WIPS) to provide continuous protection
against wireless threats and act as an additional layer of security complementing wireless VPNs and
encryption and authentication policies. The AP-6511 supports WIPS through the use of dedicated sensor
devices designed to actively detect and locate unauthorized AP devices. After detection, they use
mitigation techniques to block the devices by manual termination, air lockdown, or port suppression.
10.Select the Create icon to define a new WIPS policy that can be applied to the RF Domain or select the
Edit icon to modify or override an existing WIPS policy.
For an overview of WIPS and instructions on how to create a WIPS policy that can be used with a RF
Domain, see Intrusion Prevention on page 8-13.
11.Refer to the Statistics field to set the following data:
12.Select OK to save the changes and overrides made to the RF Domain configuration. Selecting Reset
reverts the screen to its last saved configuration.
Window Index Use the spinner control to set a numerical index used as an identifier for each
RF Domain statistics configuration defined.
Sample Interval Use the spinner control to define the interval (in seconds) used to capture
statistics supporting the listed RF Domain configuration. The default is 5
seconds.
Window Size Use the spinner control to set the number of samples used to define RF Domain
statistics. The default value is 3 samples.
To Next Page
Loading...
Need help?
General
